膠合強度試驗附件符合標準：
1. GB/T 6548-2011 瓦楞紙板粘合強度的測定
2. CNS 3327-1988 瓦楞紙板膠合強度試驗法
3. JIS Z 0402-1995 瓦楞纖維板附著力的試驗方法
膠合強度試驗附件規格參數：
|
儀器型號 |
SZ-7105-5 |
||
|
試驗形式 |
A |
B |
C |
|
試樣規格 |
80×25mm/50×150mm |
||
|
插針直徑 |
3.5±0.1mm |
2.0±0.1mm |
3.0±0.1mm |
|
插針間距 |
17.6±0.1mm |
12.0±0.1mm |
15.0±0.1mm |
|
主機尺寸 |
W130×D80×H50mm |
W100×D80×H50mm |
W110×D80×H50mm |
|
主機重量 |
1180g |
850g |
1030g |
膠合強度試驗附件英文版：
Adhesive Strength Test Accessories
Model: SZ-7105-5
This attachment is used for determining the adhesive strength of the single wall (double faces) corrugated board after being glued.
Put the prepared clamps onto the center of the lower platen of the machine in such a manner that their parting surface faces downwards. Start the ring crush tester at the specified speed until the top of the fluted paper parts from the outer paperboard. The error of the needle diameter and distance shall not exceed0.1mm.
Ⅰ Test Standard:
1. GB/T 6548-2011 瓦楞紙板粘合強度的測定
2. CNS 3327-1988 瓦楞紙板膠合強度試驗法
3. JIS Z 0402-1995 瓦楞纖維板附著力的試驗方法
Ⅱ Specifications:
|
Model |
SZ-7105-5 |
||
|
Type |
A |
B |
C |
|
Sample Size |
80×25mm/50×150mm |
||
|
Needle Diameter |
3.5±0.1mm |
2.0±0.1mm |
3.0±0.1mm |
|
Needle Pitch |
17.6±0.1mm |
12.0±0.1mm |
15.0±0.1mm |
|
Dimension |
W130×D80×H50mm |
W100×D80×H50mm |
W110×D80×H50mm |
|
Weight |
1180g |
850g |
1030g |
